Do you enjoy doing ollies on your longboard? Or maybe you’ve just decided to try an ollie but not sure where to start. And if you’ve been browsing the internet but can’t seem to find a quality piece of article that will properly educate and guide you on how to execute this trick correctly on a longboard, then do worry, my friend.
Today, I’ll tell you all the secrets you need to know about the trendiest topic in the longboard world: “can you ollie on a longboard?”
What is an ollie?
An ollie is a skating or longboarding skill in which the rider kicks the board’s tail down and pops up into the air with the board.
It’s a little challenging to learn this trick, so you have to get over the hurdle of understanding how to roll your ankle up the board and pick up the board because that what will pick up the longboard in the air and that’s how ollie is performed using longboard.
Can you ollie on a longboard?
Let me tell you that performing an ollie on a longboard is not a big deal. You can easily do this trick on a longboard that has a kicktail.
In my opinion, a drop-through may be an easier option for doing an ollie. It would help if you considered the board’s weight, deck size, and hardware before performing an ollie since a heavier board requires more effort to go into the air.
Also, nothing is mastered unless you practice it. Similarly, it would help you if you put in a lot of consistent practice sessions to achieve the results quickly.
Important Step’s for Perfect Ollie
Proper Feet Positioning: Firstly you need to begin with proper foot placement. The first thing you want to do is make sure your feet are in the right place. Place your back foot in the middle of the tail. And front foot somewhere in the middle of the board, maybe a little closer to the top bolt of the board.
Now Both toes should be lined up with the edge of the board. You want to have a good center of balance while riding the board first, because after you get the foot placement down, you’re going to need to have a balance over the back truck of the deck, and the next step is making contact with the ground using the tail of the deck.
Snapping the Tail on the Ground: Now you need to snap the tail on the ground, and simultaneously while you get that excellent snap on the ground, you’re going to lean back on the back truck. Then you need to get comfortable and try to balance on the deck’s tails and try to comfortably stand on the board, As show in the image below.
Jump: So, after you’re comfortable standing on the board’s tails, you’ll need to slide down and lift the deck from the nose again. You should repeat the same process and practice this for a while until you feel confident with this step. While you’re snapping the tail on the ground, you’ll need to leap, so snap the tail and jump at the same time. Now you’ll need to combine all of these things simultaneously for the ollie to work.
Perfect Timing: When it comes to ollie, timing is everything, so right when your tail hits the ground, you’ll jump up, and at the same time, you’ll roll your foot up to the nose of the board to pick the board off the ground, because that’s what’s going to pick the board up and level it out, and you’ll need to do this all at the same time.
Safety Gear’s to be considered while performing longboard Ollie
Shoes: The first thing you want to do is to make sure that you’re wearing the correct shoes. You don’t want to be wearing anything silly like running shoes or sandals.
You’ll need close-toed, rubber shoes, and if you can get some that go a little over the ankle, that’s even better. That way, you’re protected from rolling your ankle when you’re doing ollie because you sometime land funnily on the ground, and you don’t want to have any problems.
Pads and Helmet: I must state that getting scratched isn’t a problem for me. That’s all part of skateboarding and longboarding, but breaking a bone is how you get off longboarding. That is something you do not want to happen.
If you’re practicing this on grass or turf, there’ll not be many problems, but if you’re not, here’s what you should do. Put on a bunch of pads if you’re doing this trick on concrete. The safety gear I recommend is a Protective helmet and Wrist guards.
You can also put on elbow pads and those knee pads if you are clumsy and want to play it extra safe.
Conclusion
You need to have patience and dedication while learning new skills in longboarding. Doing ollie on longboard is not very difficult if you follow the proper step given in this article ,you will surely master this technique in no time .
You can also watch video on the internet or consult an experts but after all you need to find your own spot that works for you . So just go Grip it and Rip it.
You can also check some excellent deals and a guide if you plan to buy your first longboard. You can check our guide on – Best Longboard for Sliding. I have also shared some essential tips for all longboarder to continue their longboarding journey safely and smoothly.
Thank You 🙂